Aktiesnakken — Februar 2022
-
Global interesse for samarbejde med Quantafuel.
-
Aktier/middag: Danske Bank siver i højrødt marked
https://www.proinvestor.com/investornyt/775659/aktier-middag-danske-bank-siver-i-hojrodt-marked -
Ja, helt sort er det ikke
-
"Vores" første fabrik er jo faktisk i drift og det er fedt, selvom vi ikke er hvor vi skal være endnu, er det da stor fremgang. Og for mig en smule de-risket
-
Omkring Skive i sin præsentation var der meget solide udtalelser, vil jeg mene.
-
“The volume and figures we see today speaks for themselves”, Lars.
-
“The remaining two lines are planned to be ready for operation during the second quarter”, Lars.
-
“Stabilizing the operation and removing root causes to achieve higher uptime is ongoing. When we experience a trip or a maintenance issue, which is quite normal in an initial production phase I would say, we must resolve these very quickly to avoid a situation where we loose the heat in this continuous process. If not, we phase a re-heating period before we can re-introduce plastic feed. These re-heating periods have impacted the uptime, but it is causing that the proof of concept timer has to r
-
reset. So when these events happen we kind of start all over again on our attempt to make proof of concept. The criteria we have sat for reaching proof of concept is tough, but we will continue convert plastic waste on a daily basis and despite it takes longer than we had hoped the stability is improved week by week. That said, there is no doubt that the setup in Skive is working and based on the learnings we have in Skive, Quantafuel management and board of directors are now confident in
-
continuing the planned plastic to liquid projects.”, Lars.
-
Jeg er blevet langt mere rolig efter dagens udtalelser, det er professionelt arbejde af ledelsen for første gang i laaaannng tid, det giver mig ro i sindet, og jeg kan sove trygt om natten med mine mange QF aktier. Er fortrøstningsfuld omkring at de nok skal give stor profit indenfor de næste 2 år.
-
#128077
-
👍
-
Ja præcis
-
Med
Ca. 100 mt plastic bliver til hvad, 80 mt produkter. -
Ud fra nuværende produktion med to linjer omkring de 80.000 dollars om ugen .. ?
79% load på 2 linier er stærkt så tidligt. Oprindelig plan var 1 linie over 90% i Q1. Lyder mega lovendeHello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Tilmeld Log ind